INVERTED METALLURGICAL MICROSCOPE

Share:


INVERTED METALLURGICAL MICROSCOPE

Trinocular Observation Head (TOH)

  • Siedentopf observation head inclined at 45°.

  • Diopter adjustment ring on ocular tube (±5).

  • Inter-pupillary distance is from 52mm to 75mm.

  • It has Focusable vertical phototube for Microphotography.

Eyepiece (Anti fungus)

  • Wide field eyepiece 10X (paired) F.O.V. 20mm.

Objectives (Infinity corrected)

  • M Long working distance plan 5X

  • M Long working distance plan 10X

  • M Long working distance plan 20X

  • M Long working distance plan 50X

  • M Long working distance plan 100X (S.L.) Dry

Illuminator

  • Epi-Koehler’s illumination. Aperture iris diaphragm and field iris diaphragm 12V/100W halogen lamp.

  • The brightness is Adjustable The Filter wheel is fixed in light path with blue, green & yellow filters.

Mechanical Body (Pre-Focusing)

  • The Co-axial focusing system Comes with large knobs. It also includes PRE-FOCUSING LEVER & TENSION ADJUSTMENT RING.

  • It has Quadruple nosepiece on ball bearing.

  • It has Mechanical stage is 350mm X 208mm and moving range 50mmX50mm

  • The Mechanical stage has low positioned co-axial controls on ball bearing guide ways.

  • The Side port is with phototube for micro photography.

  • Coded quintuple nosepiece with DIC jack



 Inquiry - INVERTED METALLURGICAL MICROSCOPE